Results 1 to 3 of 3

Thread: Jon D's 2013 SCX10 Jeep Rubicon

  1. #1
    Member
    Join Date
    Sep 2008
    Posts
    386

    Jon D's 2013 SCX10 Jeep Rubicon

    Picked up a RTR a few months back and swore I would keep this one stock so I would always have a running rig. Then I finished my 1.9 Wraith about a week after getting the Rubicon and ran this JK once with the stock Treps, unweighted wheels, plastic links and NIMh battery. That didn't last long...

    So, the parts list:

    R2J lower stainless rear links
    Homemade allthread/stainless links everywhere else, including steering
    Homemade Ziploc inner fenders
    Four link front and rear
    Hitec 7955TG
    10 amp BEC programmed to 6.0 with reprogrammed stock ESC
    Stock 27 turn Axial motor
    Stock radio
    OD front/UD rears gears with stock iron cross lockers
    Beef tubes front/rear
    Rear axial aluminum lockouts
    Front axial aluminum chubs and knuckles with axial universals
    Pitbull 1.9s with CI Foams on CAC ONE9 wheels

    This one is done except for lights, winch and small scale additions. On to the pics.
    Attached Images Attached Images

  2. #2
    Member JeremyH's Avatar
    Join Date
    Aug 2008
    Location
    Houston
    Posts
    713
    Looks good!

  3. #3
    Administrator sgtsteve's Avatar
    Join Date
    Sep 2008
    Location
    Georgetown, TX
    Posts
    2,214
    Awesome Jon! I hear the pitbulls/CI foams combo is killer.


    Team Manager
    - SCALE PERFORMANCE PARTS -




Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •