PDA

View Full Version : Jon D's 2013 SCX10 Jeep Rubicon



spankbomb
07-27-2013, 06:11 PM
Picked up a RTR a few months back and swore I would keep this one stock so I would always have a running rig. Then I finished my 1.9 Wraith about a week after getting the Rubicon and ran this JK once with the stock Treps, unweighted wheels, plastic links and NIMh battery. That didn't last long...

So, the parts list:

R2J lower stainless rear links
Homemade allthread/stainless links everywhere else, including steering
Homemade Ziploc inner fenders
Four link front and rear
Hitec 7955TG
10 amp BEC programmed to 6.0 with reprogrammed stock ESC
Stock 27 turn Axial motor
Stock radio
OD front/UD rears gears with stock iron cross lockers
Beef tubes front/rear
Rear axial aluminum lockouts
Front axial aluminum chubs and knuckles with axial universals
Pitbull 1.9s with CI Foams on CAC ONE9 wheels

This one is done except for lights, winch and small scale additions. On to the pics.

JeremyH
07-27-2013, 09:56 PM
Looks good!

sgtsteve
07-27-2013, 10:50 PM
Awesome Jon! I hear the pitbulls/CI foams combo is killer.