PDA

View Full Version : ~TSS~ Walker Evans INDY S-10



STANG KILLA SS
06-13-2012, 07:59 PM
http://image.4wheeloffroad.com/f/9011974/131_0306_walk01_z.jpg

I had origonally planed to use a TA02 as a base, but then i came across the 1/16 slash and liked its much longer arms, and close hingepin locations.
got my parts list off the traxxas website exloded views, and ebayed the part numbers.

http://img12.imageshack.us/img12/8791/2slashparts.jpg

then once i had the parts, i measured them all and got to designing
http://img441.imageshack.us/img441/5131/tssindycrawler.jpg

got the IS assembled
http://img834.imageshack.us/img834/2136/3assembledindy.jpg

then after measuring the 1/16 Slash seemed a bit narrow. :(
but after more research i found out that the 1/16 Revo is wider, and that all you have to do is swap A arms and driveshafts, everything else is identical. so i ebayed the Revo parts and got them swaped over.

the 1/16 slash is 6-5/8" to the outside of the hexes and the 1/16 Revo is 8"
http://img155.imageshack.us/img155/1913/5revovsslash.jpg

RAE S-10 body, tamiya light blue, and Spaz chrome
http://img521.imageshack.us/img521/7583/4bodypaint.jpg

had the chassis cut from 1/4" Delrin
http://img703.imageshack.us/img703/6431/6chassis.jpg

now the fun begins:thumbsup:

sgtsteve
06-14-2012, 03:34 PM
Very cool Cory! Hopefully this one makes along further than the Class 0 you started last year:Shaking:

Tommy R
06-15-2012, 09:29 AM
More, please! :biggrin:

STANG KILLA SS
09-07-2012, 06:11 PM
well i got the suspension mounted up."thumbsup" CAD time paid off. everything bolted right up.8)

http://img14.imageshack.us/img14/1613/img3958nj.jpg

http://img214.imageshack.us/img214/8641/img3959b.jpg

i put on some 1.9 iroks. diff clearance is 4":eek2: and belly clearance is 5":eek2:
http://img4.imageshack.us/img4/3723/img3961mb.jpg

bigt2317
09-19-2012, 08:06 AM
This is cool, would like to see it finished. Maybe you can bring this when completed AND the trophy truck to a comp