~TSS~ Wampa Build

[STANG KILLA SS]

well this is gonna be a big change for me. all my rigs run 45Ts and move slower than I do:mrgreen:

picked up this new slider off ebay. didn't have to pay for all the stuff I was gonna throw away anyway.



Parts came in


Axial 2.2 Treps
CI DD Softs
TSS 2.2 Robby Gordons
Tenshock SC411 (3500kv, 4 pole, Sensored, exact match to Pro4 HD)
Mamba Max Pro
Hitec HS-7954
Hot Racing steering posts
Hot Racing Carbon/Alum Bellcrank setup
Axial 94mm universals
Axial 16t stock pinion
CI 6 bolt spare
Vanquish trailing arms
CFM DS collars
Duuude rang

[STANG KILLA SS]

first thing I did was strip it down to the pan


Next I installed all the steering parts. Hot Racing parts were awesome fit and tolerance. I also bought the duuude rang, but the HR servo saver spring is MUCH harder than the stock one, so I left out the rang for now. 7954 installed.


pulled the trans and t-case to check for lube. has some oil based lube (shown) that im sure would have worked fine, but I filled them up with my usual grease anyway.

[STANG KILLA SS]

got the trans, motor, and esc in. twice (wish there was a better way to install/remove center shaft)


VP trailing arms installed


CFM driveshaft collars

[STANG KILLA SS]

TSS wheels clear! even with thin SCX 5mm hexs and 225 hubs.:shock:
about .5mm on nut side, and 1mm on button side at full lock. tons more when straight of course.


I sent my panel idea to Clay at CFM, response was good"thumbsup"


more to come....

[spankbomb]

What are you going to do with the 6 bolt spare?

[STANG KILLA SS]

will be painting it and using it for the 5th tire/spare on the mount on the back ;) has a really genious setup for that.

[STANG KILLA SS]

next step is body.
i did a Carbon Fiber wrap.:shock: my first time doing a wrap.
I wish i had video of this stuff, if really dances in the light:shock: has actual woven texture too.

(Thanks Tommy R for the taillight lenses"thumbsup")

[STANG KILLA SS]

then i added some graphics. vinyl and stickers.
ill probly buy a clear interior and paint one up. on the outside. i hate how plain and shiny the stock one is.

[spankbomb]

will be painting it and using it for the 5th tire/spare on the mount on the back ;) has a really genious setup for that.

Right. I was talking about the spare's spare (6th wheel).

What are you going to do with that one?

[STANG KILLA SS]

probly hang on to it incase i switch to black wheels