Page 4 of 4 FirstFirst ... 234
Results 31 to 32 of 32

Thread: TSS Project Big B!tch Silverado

  1. #31
    Senior Member eric113's Avatar
    Join Date
    Aug 2008
    Location
    Kyle
    Posts
    1,210

    Question

    Cory, looks good if nothing else you will have ton steering.

    Steve, if you do the xr mod I look at delrin beef tubes. Everyone who has delrin say they work better than steel ones. The steel one are loose fit and the screw holes strip out.

  2. #32
    Addicted to RC STANG KILLA SS's Avatar
    Join Date
    Aug 2008
    Posts
    2,540
    well in order to use the Mayhem wheels, because the hex pocket is so deep i had to use standard Axial thick hexes with the nipple. well i wanted to use the scx-10 thin hexes to narrow the track, but mostly to reduce more tire scrub with the thicker XR knuckles. but as you can see that wasnt possible.


    so i got out the hack saw


    problem solved


    then i got all the steering links made, and decided to move the panhard axle mount from the AX10 location out on to the XR "C". this allowed the panhard rod to be 1" longer further eliminating axle swing.


    finished the truck just in time to try it out at my annual Rock The Lake 3 scale comp.
    truck did very well dispite needing a BEC. the servo winch and steering servo just didnt have enough umf to move this heavy truck.
    ended up actually winning class 3."thumbsup"















    2008 TXRCRCA Super Class State Champ
    2009 Runner Up
    and scaler freak :D

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •